Jinan Hengsheng New Buildmaterials Co.,Ltd
HOME > CASES >

The hospital of Santa maria maternity

Installation Instruction
1、Measuring the length of the metope which have to be installed. In additon, to install the elbow, you have to make occupation for 10cm in advance respectively at the both sides of the metope.
2、Cutting the equivalent length of al-alloy, according to the length of the metope you have measured.
3、Punching in the al-alloy.
Punching at a distance of 1.5-2cm from both ends of al-alloy to install the elbows. Punching the second hole is at a distance of 15cm from the first hole at both sides. And the rest holes to be drilled is at a distance of 60cm from each other.
4、Marking according to the position of the hole on the al-alloy in the wall, then punching in the wall. 
5、Installing the elbow to the aluminum.
6、 Putting the bulge in the hole. And fixing the al-alloy on the wall by the screws and brackets. Then turn the screws with drill into the wall.
7、 Cutting the PVC panels according to the length of the al-alloy (the length of the panel is longer 2 cm than that of the al-alloy). Then installing after cutting the panel.

HOT NEWS

Peru chalaco hospital
The second hospital of shandong
The hospital of Santa maria mat


Quick Contact

Timely communication

CopyRight@2016 Jinan Hengsheng New Buildmaterials Co.,Ltd All rights reserved PRODUCTS| NEWS

close